Microprocessor

DYNA-85 (8085 Trainer Kit):

  • 16k Powerful monitors FIRMWARE including all standard commands codes, funtions and utility subroutines Assembler & Disassembler. 4K has been used for system firmware
  • 24 parallel I/O lines from 8155 are bought on separate FRC Connector.
  • 22 Parallel I/O lines from 8155 are bought on separate FRC Connector 2k-bit static RAM ( 256 ) bytes and a timer also available.
Dyna 85
  • Build inaudio cassette interface.
  • 8279 Keyboard display controller is used for Hex pad keys & Display interface ( 21 keys & 6 digit Seven Segment display).
  • All address, data and control and hardware interrupt lines are brought out on a 50 PinFRC connector for system interfacing and expansion.
  • Three 16 bit Timer/Counter channels are available on-board 8253. These channels are available on a 10 pin FRC connector.
  • Serial I/O through auto adjusting type RS-232 channel. this connector is coveniently brought on the rear using SID-SOD llines.
  • High performance 8 bit 8085 A CPU @ 3 MHz
  • 8K User RAM using 6264

 

DYNA – 85L (8085 Trainer kit with LCD) :

Specifications :

  • High performance 8bit 8085A CPU @ 3 MHz.
  • 16 K powerful monitors FIRMWARE Including all standard commands, codes functions and utility subroutines, Assembler and Disassembler. 4K has been used for system firmware.
Dyna 85L
  • Three 28 pin sockets provided for memory expansion up to a maximum of 56k.
  • 22 Parallel I/O lines from 8155 are bough on separate FRC Connector 2k- bit static RAM ( 256 bytes ) and a timer also available.
  • Versatile Keyboard/Display controller using 8279 brought out on separate FRC connector.
  • Address, data and control and hardware interrupt lines are brought out on a Pin FRC connector for system interfacing and expansion.
  • All DYNA Study & PIO Cards are supported by this trainer kit.
  • Serial I/O through auto adjusting type RS-232 channel. This connector is conveniently brought on the rear using SID-SOD lines.
  • On board 40*2 LCD display & connector for 104 Key Standard PC-compatible Keyboard.
  • On board PIO power supply connector is provided for PIO interface.
  • 8K User RAM 6264 with battery backup for sockets using 3.6V Ni-Cd Battery.

DYNA - 85LU (LCD & USB):

Specifications:

  • Operated on 5V @ 1A built in Power Supply.
  • 8K user RAM 6264 with battery backup for sockets using 3.6vNi-Cd Battery.
  • 16 K powerful monitors FIRMWARE Including all standard commands, codes functions and utility subtoutines, Assembler and Disassembler. 4 K has been used for system firmware.
86lU
  • Three 28 Pin sockets provided for memory expansion up to a maximum of 56  K.
  • Three 16 bit Timer / counter channels are available on board, using 8253. These channels are available on a 10 pin FRC connector.
  • Dyna 85LU advanced trainer kit with LCD & USB
  • Versatile Keyboard/ Display controller using 8279 brought out on separate FRC connector.
  • All address, data and control and hardware interrupt lines are brought out on a Pin FRC connector for system interfacing and expansion.
  • Serial I/O through auto adjusting type RS-232 channel.
  • Switch Mode Power Supply: +5v 1A, +12v 1A, -12v 0.5A.
  • 22 Parallel I/O lines from 8155 are bough on separate FRC Connector. 2k-bit static RAM (256 bytes and a timer also available.
  • DYNA – 86 :

Specifications:

  • High Performance 16 bit 8086 CPU @ MHz.
  • All 8086 bus Signal terminated on 50 and 20 Pin FRC Connector.
  • 64 KB Powerful Monitor Firmware in two 27256 RPROMs organized as 16 bit words. Expandable to 128 KB using two 27512 EPROMs.
  • 3.6V Ni-Cd battery backup circuit for static RAMs.
  • 8284 Clock Generator
  • 8288 Bus Controller.
Version 1.0.0
  • Two Modes of Power Supply: +5V 3A, +12V 1A, -12V 0.5A
  • 64 KB Static RAM in two 62256 RAMs organized as 16 bit words with battery back-up
  • Printer interface Provided through another 26 pin FRC connector
  • Detachable Hex Keypad & Display PCB with 28 keys and 8 digit seven segment display.
  • All DYNA Study & PIO Cards are supported by this trainer kit.
  • Serial I/O through 8251 USART, with on-board level shifters 1488 & 1489, brought out on a 9 bit D type Connector.

DYNA – 86L (Training Development System With LCD) :

Specifications :

  • High Performance 16 bit 8086 CPU @ MHz.
  • Optioanal Socket for 8087-2NDP (Co-Processor).
  • 64 KB Powerful Monitor Firmware in two 27256 EpROMs organized as 16 bit words. Expandable to q28 KB using two 27512 EPROMs.
dyna-86l-8086-p-training-500x500
  • 64 KB Static RAM in two 62256 RAMs organized as 16 bit words with battery back-up
  • Printer interface Provided through another 26 pin FRC connector
  • Detachable Hex Keypad & Display PCB with 28 keys and 8 digit seven segment display.
  • Hex Pad / Display Interface through 8279 Keyboard Display controller.
  • On board 8254 Time/counter chip. Out of 3 channels of Timer/ Counter Two channels are totally available to the user throough a 7 pin relimate connector.
  • All 8086 bus Signals terminated on 50 and 20 Pin FRC Connector
  • All DYNA Study & PIO Cards are supported by this trainer kit.
  • Serial I/O through 8251 USART, with on-board level shifters 1488 & 1489, brought out on a 9 bit D type Connector.
  • 8284 Clock generator, 8288 Bus Controller.
  • 48 Parallel I/O lines from Two 8255 are brought out on separate FRC Connector.
  • Printer Interface Provided through another 26 pin FRC Connector.
  • On board 40*2 LCD Display & Connector for 104 Key Standard PC-compatible Keyboard.

Dyna 86 LU ( LCD & USB ) :

Specifiication :

  • 8259 Interrupt Controller Provides 8 prioritized interrupt Levels.
  • Serial I/O through 8250 USART with on-board level shifters 1488 & 1489, brought out on a bit d type Connector.
  • Printer Interface Provided through another 26 pin FRC Connector.
86lU
  • Onboard 40*2 LCD Interface options.
  • Two modes of Operation : Monitor Mode & Serial Mode.
  • On board 8254 Time/counter chip. Out of 3 Channels of Timer/ counter Two Channels are totally available to the user through a 7 pin relimate Connector.
  • 64 KB Static RAM in two 62256 RAMs organized as 16 bit words with battery back-up.
  • On board 40*2 LCD display & connector for 10 Key Standard PC-compatible Keyboard.
  • Software Selectable Baud Rates : 300 to 9600 bps.
  • All 8086 bus signals terminated on 50 and 20 Pin FRC Connector.
  • Serial I/O through 8251 USART, with on-board level shifters 1488 & 1489, brought out on a 9 bit D type Connector.
  • 8284 Clock generator, 8288 Bus Controller.
  • 48 Parallel I/O lines through form Two 8255 are brought out on separate FRC connector.
  • Software selectable Baud Rates : 300 to 9600 bps
Scroll to Top